Configure Vendor Option Data Globally

Before you begin

  • Define the vendor option.

About this task

Perform this procedure to configure DHCP vendor option data global parameters.

Note

Note

The switch follows inheritance and precedence rules for configured DHCP Server options.

The switch process the DHCP options in the following order of precedence:

  1. host—Host configuration applies only to a specific host.
  2. DHCP subnet—DHCP subnet options apply to only those clients within the specified subnet.
  3. vendor class—Vendor class options apply to only those clients with a string that matches a specified vendor class identifier (VCI).
  4. global—Global options apply to all clients.

DHCP Server builds a cumulative configuration from all scopes but applies precedence rules in instances of conflict.

Procedure

  1. In the navigation pane, expand Configuration > IP.
  2. Select DHCP Server.
  3. Select the Global Vendor option Data tab.
  4. Select Insert.
  5. In Id, type the DHCP code that you defined for the option.
  6. In Value, type the data value to assign to the option.
  7. Select Insert.

Global Vendor option Data Field Descriptions

Use the data in the following table to use the Global Vendor option Data tab.

Name Description
Id

Specifies the DHCP code that identifies this vendor option.

Value

Specifies a value to apply to this vendor option.

9039034-00 Rev AB